OM2000+

3400 €

Specification of OM2000+ :

Frequency coverage :Amateur bands 1.8 – 29.7 MHz including WARC + 50 MHz
Puissance de sortie :2000+ W in SSB/CW sur bandes HF, 1500 W CW/SSB sur 50 MHz 1500 W in RTTY
Puissance d’entrée :40 à 60 W
Impédance d’entrée :50 Ohm VSWR < 1.5 : 1
Gain :15 dB
Impedance de sortie :50 Ohm
Maximum sortie SWR :2:1
SWR protection :Automatic switching to STBY when reflected power is 250W or higher
Intermodulation distortion :32 dBc
Suppression of harmonics :min -50 dBc ( 30–54 MHz better than 70dBc)
Tube :FU-728F ceramic tetrode
Cooling :Centrifugal blower + axial blower
Alimentation :Switchable 220, 230 , 240 V – 50/60 Hz
Transformers :1 toroidal transformer 3 kVA
Protection circuits :- SWR too high
 - Anode current too high
 - Screen current too high
 - Grid current too high
 - Mistuning of power amplifier
 - Temperature to high
 - Soft start for fuse protection
 - “switch –on blocking “ at opened amplifier
Indications :- OLED display 4 x 20 character
 - Analog 2 systems meter for forward and reflected power
LED indicators :- ON status
 - STBY– standby
 - FAULT – warnings and faults indicator
 - ON AIR – amplifier in transmitting status
Features :- Antenna switch for 3 antennas
 - Memory for faults and warning, easy maintenance
 - Automatic set-up anode current (BIAS ) – no need to manual adjust after changing the tube
 - Temperature controlled 2-speed centrifugal blower ( turbine ) + axial blower
 - Full QSK with silent vacuum relay
 - The smallest and lightest 2000W PA on the market
Mechanical parameters :390mm x 195mm x 370mm (width x height x depth)
Weight :24 kg
Vue interne